| View previous topic :: View next topic |
| Author |
Message |
31cc
Joined: 17 Jan 2008
Posts: 37
|
 Posted: Fri Jan 18, 2008 3:16 am Post subject: spindle drive |
 |
|
what r u guys using for your spindles and were do you get them iv get a peg that I chopped and rewelded not sure if it works yet and my friends dad laythed a nice aluminum screw on spindle for me but it doesn’t grip very well
so if u have any info that can help me find a good it would be much Appreciated thanks |
|
| Back to top |
|
 |
cul8ter
Joined: 29 Jun 2005
Posts: 646
Location: Melbourne, Australia
|
| Posted: Fri Jan 18, 2008 5:46 pm Post subject: |
|
|
| Goped spindles are good, and cost around 25-40 dollars Australian. You can find them on ebay and on the goped australia website. Another thing you can use is gears from car and motorbike transmissions. |
|
| Back to top |
|
|
31cc
Joined: 17 Jan 2008
Posts: 37
|
| Posted: Sun Jan 20, 2008 3:59 am Post subject: |
|
|
| i have a goped spindle how would u atach it mines a bult on and i welded it on once but it cracked off |
|
| Back to top |
|
|
cul8ter
Joined: 29 Jun 2005
Posts: 646
Location: Melbourne, Australia
|
| Posted: Sun Jan 20, 2008 2:38 pm Post subject: |
|
|
| Since I cant see the engine your trying to attach it to, I cant really help. Dont weld it on again though. Instead use nuts and bolts. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
